<string id="AUDIO_STREAM_UNSUPPORTED" value="The selected multiplexer does not support the selected audio format."/>
<string id="NOT_STANDALONE_ENCODER" value="The selected audio encoder is a portion of the video encoder and can not be used for audio-only transcoding."/>
<string id="ERROR_VIDEO_TRANSCODE" value="Error occurs during video transcoding."/>
<string id="TRANSCODE_REPORT" value="%d file(s) / %d MB have been transcoded into %.1f MB
Total time elapsed: %d seconds
Compression ratio: %.2f:1"/>
<string id="INCOMPATIBLE_AV" value="The selected video format is incompatible with the selected audio format."/>
<string id="TRANSCODE_FAIL" value="The transcoding is not successful. Please check log (in Expert mode) for details."/>
<string id="NO_FILE_OUTPUTED" value="No file is outputed."/>
<string id="TRANSCODE_INTERRUPTED" value="Transcoding is interrupted by user."/>
<string id="CANNOT_MUX_AUDIO" value="The target audio format cannot be muxed into the selected container format. The audio stream will be bypassed."/>
<string id="ERROR_PS" value="Parametric stereo can only be applied for encoding with bitrate of no higher than 48Kbps."/>
<string id="UNSUPPORTED_MODE" value="This encoding mode is not supported by the encoder."/>
<string id="ERROR_MUX" value="Audio stream and video stream cannot be muxed together."/>
<string id="ERROR_MUXER" value="Multiplexer failed to work."/>
<string id="INVALID_FILE" value="The container information of file %s cannot be interpreted. However it is still quite likely that it can be transcoded. Are you sure you want to transcode this file?"/>
<string id="FOUND_MATCH_PLUGIN" value="Found matched input plugin for %s"/>
<string id="START_JOB" value="Start transcoding job for %s"/>
<string id="FINISH_JOB" value="Finished transcoding job for %s"/>
<string id="OVERWRITE_CONFIRM" value="The target file %s already exists.
Choose "Yes" to overwrite it. Choose "No" to rename the existing file. Choose "Cancel" to skip this file."/>
<string id="OVERWRITE_KEEP" value="Do you want to apply your choice to the rest of the files in the queue in this manner?"/>
<string id="ERROR_DELETE" value="File %s is in use and cannot be overwritten."/>
<string id="EXTRACT_WAVE" value="Extracting waveform from file %s"/>
<string id="ERROR_AUDIO" value="Error occurred during audio transcoding."/>
<string id="ERROR_VIDEO" value="Error occurred during video transcoding."/>
<string id="FILE_NOT_FOUND" value="%s not found"/>
<string id="INCORRECT_VERSION" value="Incompatible version of %s loaded."/>
<string id="INCORRECT_SETTINGS" value="Incorrect parameters for %s."/>
<string id="SET_FRAME_SIZE" value="Setting frame size to %d bytes"/>
<string id="INVALID_SAMPLE_RATE" value="The sample rate of the input stream is out of the valid range of %s."/>
<string id="RUNNING" value="Running %s"/>
<string id="INVALID_BITRATE" value="Invalid bitrate is set."/>
<string id="CT_INFO" value="To use CT aacPlus encoder, you need to either install Winamp5 or copy corresponding DLLs into MediaCoder's "codecs" folder."/>
<string id="PREVIEW_TIP" value="Video preview is not available before (last pass of) video encoding begins."/>
<string id="PREVIEW_TIP2" value="Preview is only available after transcoding begins."/>
<string id="INVALID_DEST_DIR" value="The output folder is not accessible. Transcoding process cannot continue."/>
<string id="INVALID_TEMP_DIR" value="The working folder is not valid. Transcoding process cannot continue."/>
<string id="JOIN_TIP1" value="MediaCoder is in Joiner mode.
However, file %s and %s are not in the same resolution or frame rate.
To ensure a successful joining, please apply scaling and specify frame rate."/>
<string id="JOIN_TIP2" value="MediaCoder is in Joiner mode.
However, file %s and %s are not with the same audio sampling rate.
To ensure a successful joining, please apply resampling."/>
<string id="JOIN_TIP3" value="Joiner mode has only limited support at the moment and is not compatible with current settings."/>
<string id="WMA_NA" value="Windows Media Encoder is not installed."/>
<string id="SPLIT_ERROR" value="Target mode requires encoders in target bitrate mode instead of target quality mode."/>
<string id="INCOMPAT_AUDIO" value="The target audio format is incompatible with current settings."/>
<string id="INCOMPAT_VIDEO" value="The target video format is incompatible with current settings."/>
<string id="INCOMPAT_CONTAINER" value="The target container format is incompatible with current settings."/>
<string id="transcode_paused" value="transcoding process paused"/>
<string id="transcode_resuming" value="transcoding process resuming..."/>
<string id="inited" value="Initialized"/>
<string id="httpd_starting" value="Attempting to start built-in HTTPd on port %d"/>
<string id="httpd_started" value="Built-in HTTPd started on port %d"/>
<string id="httpd_error" value="The built-in HTTP daemon cannot be started. MediaCoder's built-in HTTP daemon only listen on localhost and is used to generate some user interfaces of MediaCoder. If it cannot start, MediaCoder will still run but some user interface will not show."/>
<string id="transcoding" value="transcoding in progress..."/>
<string id="video_enc_no_audio" value="The video encoder backend %s does not have audio support. Please choose an external multiplexer to perform audio/video transcoding with this video encoder."/>
<string id="NO_FILE_OUTPUTED" value="No file is outputed"/>
<string id="split_error" value="Current settings cannot work with split mode"/>
<string id="decode_thread_block" value="The decode thread seems to be blocked. If you are not running other program that consumes all CPU time, this may indicate that the decoder has encountered an error and stopped working. Do you want to interrupt the task?"/>
<string id="encode_thread_block" value="The encode thread seems to be blocked. If you are not running other program that consumes all CPU time, this may indicate that the encoder has encountered an error and stopped working. Do you want to interrupt the task?"/>
<string id="muxing" value="muxing streams into container"/>
<string id="test_phase" value="Testing Phase"/>
<string id="test_failure" value="The testing phase has failed. Do you still want to process the whole file?"/>
<string id="CROP_CONFIRM" value="Do you want to keep the change of the cropping parameters?"/>
<string id="PSP_DIRECT" value="PSP is connected. Do you want to directly transcode into your PSP?
(Output folder will be set to %s)"/>
<string id="CHANGE_DEST_DIR" value="The output folder is not accessible at the moment. Please choose another folder as the output folder."/>
<string id="DRIVE_ABSENT" value="The drive of the output folder is not available. If it is a removable drive, it may have been removed or disconnected."/>
<string id="NO_DEV_PLUGIN" value="No extension is available."/>
<string id="URL_ERROR" value="The URL isn't likely to point to any streaming media."/>
<string id="CROP_TIPS" value="Hold left mouse button down inside the video window and drag to set the left/top position of the cropping area.
Drag the outer edge of the video window to set the width/height of the cropping area."/>
<string id="DEVICE_TIP" value="Please note that the current settings have been modified by the plug-in.
Choose Yes if you want to leave all the settings as they are. Choose no to revert all settings to their defaults."/>
<string id="PRESET_NEW" value="You are about to create a new preset. Are you sure you want to do this?"/>
<string id="PRESET_ERR_LOAD" value="Unable to load the preset file."/>
<string id="PRESET_ERROR" value="Error accessing to preset file."/>
<string id="PRESET_DEL_CONFIRM" value="You are about to delete the selected preset. Are you sure you want to do this?"/>
<string id="DEMO_MSG" value="This is a demo release for evaluation purpose only."/>
<string id="PRESET_DEL_CAT" value="There is no preset left in current catalog. Do you want to remove this catalog?"/>
<string id="PRESET_TIP" value="The catalog is empty. To add a preset into the catalog, type the name for the preset in the preset combo box, make your settings and click Save button."/>
<string id="NO_ENCODER_VER" value="Unable to retrieve version information of %s"/>
<string id="ver_info" value="%s Version %d.%d.%d build %d (built on %s)"/>
<string id="based_on" value="Based on "/>
<string id="copyright_info" value="MediaCoder is a free software distributed under MPL license.
(C)2005-08 Stanley Huang <stanleyhuangyc@gmail.com>. All Rights Reserved."/>
<string id="pause_error" value="The working encoder doesn't support pausing"/>
<string id="cw" value="CW"/>
<string id="ccw" value="CCW"/>
<string id="KB" value="KB"/>
<string id="split_into" value="Split into clips of %d %s"/>
<string id="keep_choice" value="Do you want to make this choice persistant? If you choose Yes, you won't be prompted for the previous question again in the future."/>
<string id="httpd_error" value="The built-in HTTP daemon failed to start and thus the UI you are opening cannot be displayed."/>
<string id="auto_select" value="Auto Select"/>
<string id="browser_notice" value="Many of MediaCoder's user interfaces are XUL based, which depends on Firefox to render. Firefox is a free, open source, cross-platform, graphical web browser. If you have Firefox but MediaCoder failed to detect it, you can manually specify the path to it. If you don't have it, click the button on the bottom-right to download it."/>
<string id="invalid_browser_path" value="Without Firefox available, MediaCoder's XUL based user interfaces won't be able to show. Do you want to download Firefox now?"/>
<string id="add_comments" value="click to view and comment"/>
<string id="delete_notice" value="You have chosen to delete original files after transcoding. Are you sure you want this?"/>
<string id="persist_choice" value="Remember my choice and do not show this prompt again."/>
<string id="shutdown_notice" value="You system is going to be shut down."/>
<string id="donate" value="Donate"/>
<string id="confirm" value="Confirm"/>
<string id="message" value="Message"/>
<string id="prompt" value="Prompt"/>
<string id="prompt_yes" value="Yes"/>
<string id="prompt_no" value="No"/>
<string id="prompt_cancel" value="Cancel"/>
<string id="prompt_ok" value="OK"/>
<string id="prompt_countdown" value="%d seconds left for choice"/>
<string id="prompt_errcode" value="Last Error Code: %03d | Click to get more information on this error"/>
<string id="stream_copy" value="Stream Copy"/>
<string id="revert_notice" value="Do you want all settings to be reverted to defaults before continue?
This can avoid some failures caused by incompatible settings, but will also make your manually changed and tuned parameters to be reverted."/>
<string id="splitting" value="Splitting"/>
<string id="error" value="Error"/>
<string id="paused" value="Paused"/>
<string id="stopping" value="Stopping"/>
<string id="transcoding" value="Transcoding"/>
<string id="screenshot_msg" value="The screenshot has been saved to "/>
